Bulb Components

P1102 FINGER BALLAST FOR OLDER HOODS

This finger ballast was used on the older vent a hoods before the square ballast was used on models featuring fluorescent lights. The manufacturers model number P1102. The manufacturer no longer sells this ballast. It was made by Robertson CAT. NO L15A 1106-001 120V 60Hz 0.30A
I have no stock on this part

P1101 SQUARE BALLAST FOR USE WITH A FLUORESCENT TUBE LIGHT
This vent a hood square ballast is for use with f15/t8 fluorescent 15 watt tube style light bulbs. This ballast features two leads. The manufacturers part number is P1101

$31.00

P1103 & P1104 FLUORESCENT LAMP END SET

This set of left and right lamp ends are standard on vent a hoods that feature fluorescent lights. Each lamp end attaches with one fastening screw.

$14.00

P1105 FLUORESCENT BULB STARTER

This FS-2 starter is the standard replacement for vent a hoods equipped with fluorescent lighting. The manufacturers model number is P1105.

$4.00

P1106 STARTER SOCKET

This starter socket is compatible with fs-2 starters and is compatible with all vent a hoods equipped with fluorescent lights. The manufacturers part number is P1106

$9.00

P1120 REPLACEMENT FLUORESCENT BULB

This replacement bulb is standard in older vent a hood units. It is the f15/t8 size bulb in the color cool white. This bulb rotates into the lamp ends with two pins on both the left and right side of the bulb.

$14.00

P1123 HALOGEN PAR20 SOCKET

This vent a hood threaded socket is compatible with par20 halogen bulbs with part number P1130. They come wired with two leads. The manufacturers part number is P1123

$4.00

P1110 QUARTER TURN HALOGEN BULB GU10

This GU10 halogen bulb fits newer vent a hood units. The manufacturers part number is P1110. This bulb is only compatible with hoods that feature quarter turn P1124 light sockets. In mid 2020 there has been a federal mandate for light bulb manufacturers to drop the wattage of there halogen bulbs ( the 50 watt light bulb is no longer manufactured in the states ) . Regulations can vary depending depending on the state you are living in . The bulbs we furnish today are 35 watt halogen. We can no longer source the 50 watt bulbs that originally came with your vent a hood
https://insights.regencylighting.com/state-light-bulb-bans
We do offer a led conversion kit located on this same page if you would like to convert away from halogen before your state restricts the sale of the bulb

$16.50

P1127 FLUORESCENT LIGHT DIFFUSER COVER

This plastic light cover is designed for use with some older model vent a hoods. Its manufacturers part number is P1127.

THIS ITEM WAS DISCONTINUED BY THE MANUFACTURER AND IS UNAVAILABLE

P1130 HALOGEN PAR20 BULB

This vent a hood replacement halogen bulb fits a standard par20 lamp base. Its compatible with hoods that feature P1123 screw in light sockets.

$16.50

P1124 QUARTER TURN GU10 HALOGEN BULB SOCKETS

This vent a hood halogen light socket is compatible with newer hoods made after 2010 that feature the GU10 quarter turn two prong halogen bulbs. The manufacturer had two designs for this socket and this is the replacement piece is compatible with both models.

$9.45

P1350 Replacement LED bulb

The LED bulb was first introduced in 2013 and this part is proprietary to their product. This part is available through authorized vent a hood resellers only. No generic version exists 120v/60hz 3 watt 2700k

$62.00

P1355 Replacement LED bulb brighter 5000k

This LED bulb is a brighter replacement option for the p1350. This bulb is not currently offered in any production vent a hood model, its an aftermarket option if you feel the p1350 isn't quite bright enough. Under-cabinet LED lights are typically 5000k and by changing your vent a hood over to these bulbs your hood may match your under-cabinet LED lighting closer ( if you have under-cabinet lighting ) 120v/60hz 3 watt 5000k

$62.00

HEAT LAMP SOCKETS FOR OLDER VENT A HOODS PRE 1994

These heat lamp sockets where offered on older vent a hoods, they hung inverted inside the hood to allow the heat lamp bulbs to face directly down over the warming shelves.

$48.00

Lumiline bulbs for vent a hoods over 50 years old

Lumiline has been discontinued by lighting manufacturing companies however new LED technology will allow you to replace your old lumiline bulb with LED technology. Follow this link to ebay or go to google and type in Lumiline LED bulb. We don't carry the replacement bulb at ventahoodparts.com

Lumline bulb LED

Replacement 2 Slide switch white color Light bar (2 3/4 inches wide) 1 1/2 inches tall 2 switches for hoods that feature a single motor

The manufacturer has discontinued making replacement control panels for fluorescent equipped ventilation hoods. The stock is very limited. This model is 2 3/4 inches wide ( this will not fit hoods that require a 2 inch wide control box ) This model is also 1 1/2 inches tall. Your existing wire-way will not fit if your current control box is not 1 1/2 inches tall $150.00
2 switches for hoods that feature a single motor

Replacement 2 Slide switch black color Light bar (2 3/4 inches wide) 1 1/2 inches tall 2 switches for hoods that feature a single motor

Replacement 2 Slide switch Light bar Silvertone color (2 3/4 inches wide) 1 1/2 inches tall 2 switches for hoods that feature a single motor

The manufacturer has discontinued making replacement control panels for fluorescent equipped ventilation hoods. The stock is very limited. This model is 2 3/4 inches wide ( this will not fit hoods that require a 2 inch wide control box ) This model is also 1 1/2 inches tall. Your existing wire-way will not fit if your current control box is not 1 1/2 inches tall $189.00
2 switches for hoods that feature a single motor

Replacement 2 rocker switch white color Light bar (2 1/4 inches wide) 1 3/4 inches tall 2 switches for hoods that feature a single motor

The manufacturer has discontinued making replacement control panels for fluorescent equipped ventilation hoods. The stock is very limited. This model is 2 1/4 inches wide ( this will not fit hoods that require a 2 3/4 inch wide control box ) This model is also 1 3/4 inches tall. Your existing wire-way will not fit if your current control box is not 1 3/4 inches tall $165.00

Replacement 2 rocker switch light bar gunmetal grey color ( 2 3/4 inches wide ) 3 1/8 inches tall

The manufacturer has discontinued making replacement control panels for fluorescent equipped ventilation hoods. The stock is very limited. This model is 2 3/4 inches wide ( this will not fit hoods that require a 2 inch wide control box ) This model is also 3 3 1/8 inches tall. This light bar includes a diffuser cover over the fluorescent bulb. your existing unit may not have a diffuser however this light bar will still work as long as you confirm the width of the lightbar needed is 2 3/4 inches $220.00

GU10 Halogen light bulb conversion kit to LED

This LED conversion kit will only work to replace GU10 quarter turn halogen light bulbs. ( this does not work to replace par 20 halogen light bulbs ) The switch features a dimmer pack to give you both high and low LED settings. The 3 watt LED bulb 30 percent brighter the the old Halogen 50 watt bulbs. LED lights also save on power consumption and run cooler to touch then halogen. The average life of a halogen bulb is short at 7 years compared to LED that can last over 15 years.

1 switch with two LED bulbs $45.00