Switches

P1408 GLAMOUR CAP FOR SLIDE SWITCHES

This cap was designed to mount on slide switches on older model vent a hoods. The glamour cap is manufacturers part number P1408. This item is no longer available.

Replacement aftermarket slide switch cap

This cap will fit your OEM slide switch or the replacement slide switches sold at ventahoodparts.com. The shape is different then the factory switch cap, however it seats correctly on the switch

3.90

P1401 SLIDE SWITCH FOR OLDER VENT A HOODS

This vent a hood slide switch is a replacement for older models and works in conjunction with motors and fluorescent lights. ( The original switch is no longer offered by the manufacturer ) This switch comes complete with two leads and mounts with two screws and nuts provided. This is an aftermarket switch since the original part is no longer offered by the manufacturer. The part number is P1401. -Vintage part -

$15.00

P1431 ROCKER SWITCH FOR SINGLE SPEED MOTOR

This vent a hood rocker switch is a standard replacement for motors that have one speed. This switch will not mount into older vent a hoods that featured slide switches. This switch comes complete with two leads. The manufacturers part number is P1431.
$7.50

P1434 ROCKER SWITCH FOR 2 SETTING HALOGEN LIGHTS

This vent a hood rocker switch is a standard replacement for hoods equipped with halogen lighting . This switch will not mount into older vent a hoods that featured slide switches. This switch comes complete with two leads. The manufacturers part number is P1434

$8.90

P1433 ROCKER SWITCH FOR DUAL SPEED MOTOR

This vent a hood rocker switch is a standard replacement for motors that have dual speeds ( low and high ). This switch will not mount into older vent a hoods that featured slide switches. This switch comes complete with three leads. The manufacturers part number is P1433

$8.90

P1432 ROCKER SWITCH FOR FLUORESCENT LIGHTS

This vent a hood rocker switch is a standard replacement for hoods that feature fluorescent lights. This switch will not mount into older vent a hoods that featured slide switches. This switch comes complete with two leads. The manufacturers part number is P1432.

DISCONTINUED BY THE MANUFACTURER

P1435 SWITCH

$8.50

P1350-1 Dimmer pack for LED

$16.50

P1421 ROCKER SWITCH FOR DUAL SPEED MOTORS BLACK WITH NO IKON

This switch is identical to model P1433 and works with motors that have 2 speeds ( LOW AND HIGH ). This is the generic switch in all black with no ikon and is less expensive. This switch comes wired with 3 leads

WE ARE UNABLE TO ORDER ADDITIONAL DISCONTINUED

P1420 ROCKER SWITCH SUITABLE FOR SINGLE SPEED MOTORS AND FLUORESCENT LIGHTS NO IKON

This rocker switch can be used in place of model number P1432 and P1431. It is the generic version of the switch since its all black with no ikon. This switch is less expensive.

$2.30

Works for magic lung

Magic lung Blower switch knob P1470-1

$11.59 it takes a 1.5 mm allen wrench to tighten or loosen these. This knob is for units equipped with the magic lung blower system. This knob is not for use with the m series blowers

Works for magic lung

works for m series

Magic lung / M series Light switch knob P1475-1

$11.59 it takes a 1.5 mm allen wrench to tighten or loosen these. This knob is for units equipped with the magic lung blower system. This knob can also be used with M series

M series fan control knob P1445

#11.59 it takes a 1.5 mm allen wrench to tighten or loosen these. This knob can only be used with M series vent a hood products

P1465 MOTOR CONTROL ROTARY SWITCH

B200 - T200 - T400 (4) This is a 4 position switch for hoods equipped with the magic lung ( not compatible with m series hoods )

$16.50

P1460 ROTARY SWITCH FOR 3 POSITION LED LIGHT CONTROL

B200- T200- T400 (2) This is a 3 position switch for hoods equipped with the magic lung ( not compatible with m series hoods ) you will need a dimmer pack sold seperate

$16.50

Warming light switch P1419

This on and off switch controls heat lamp bulbs
$23.00

P1422 Heat lamp switch knob
$8.00

P1402 PUSH BUTTON SWITCH

This push button switch is compatible with older model vent a hoods. The switches come wired with 2 leads.

$14.00

p1500w switch. This is the wall switch to control the rm1000 or the rm1500 remote blower. This switch will not work with the older rm1150 and rm900 remote blowers

$120.00 includes shipping THIS ITEM IS NON STOCKING. IT WILL REQUIRE A 5 WEEK LEAD TIME TO ARRIVE

p1425 switch for remote blower. This switch is compatible with the rm1000 and the rm1500 model remote blowers. This switch is not compatible with the older discontinued remote blower models rm900 and rm1150.

THIS ITEM IS NON STOCKING. IT WILL REQUIRE A 5 WEEK LEAD TIME TO ARRIVE

$87.00 includes shipping

P1409 MOMENTARY SWITCH FOR TILT OUT HOODS

This momentary switch was used exclusively for tilt out model vent a hoods. The switch triggered the motors to turn on only when the hood flap was pulled to the open position. This item has been discontinued